Natural Built Home Product/Classes Feed

AFM Low VOC Cabinet & Trim Enamel (Semi-Gloss)

Sun, 08 Jan 2006 19:13:18 +0100

DESCRIPTION: Safecoat Cabinet & Trim Enamel is a premium quality, fast curing enamel paint specially formulated for interior surfaces where exceptional durability, abrasion resistance and block resistance are required. Its durable finish and superior film formation properties make it particularly well suited for kitchen and bathroom cabinets and walls. Like all Safecoat paints, it can be used wherever the health of the occupants is a concern: schools, hospitals, homes, offices - anywhere people want to reduce their exposure to toxic chemicals.

USE ON: Cabinets, trim, doors, wood and any other surfaces on which the superior qualities of this paint are desired.

ADVANTAGES / SIGNIFICANT BENEFITS:

Extremely durable, semi-gloss finish.

Resistant to blocking.

Safely used by and for the chemically sensitive.

Low odor, non-offensive to installer and occupant.

Fights indoor air pollution, seals in the outgassing from the substrate.

Very low VOC content, meets or exceeds all federal and state air quality regulations, including California.

SURFACE PREPARATION: Careful surface preparation is the most important part of painting. Surfaces to be coated with Safecoat Cabinet & Trim Enamel should be sound and cleaned of dirt, grease and oil. Cleaning with an odorless, dye-free, all-purpose cleaner like SafeChoice Super Clean is recommended. Previously painted surfaces in poor condition should be scraped, sanded smooth, and primed with a coat of Safecoat Transitional Primer. Always test for adhesion over prior coatings (water based paints do not adhere well to oil based finishes without removal or careful surface preparation, for example). New wallboard or sheetrock should first be coated with Safecoat New Wallboard Primecoat HPV. Porous new wood should be sealed and sanded before priming with Safecoat Transitional Primer. Note that many types of wood require sealing with special stain and tannin blocking primers before they can be coated with a waterbased paint. Such water and other stains must be blocked before applying Safecoat. The best results finish will be achieved with a primer and two finish coats. Environmental conditions are crucial: if the air temperature is too hot or too cold, the product will not cure properly; if the air or the wood is too dry, or there is too much moisture in or on the surface, other problems may result. In addition, many surfaces contain water-soluble tannins or acids which are activated by the application of a water based product and will “bleed through” to the surface absent application of a specialty primer. All of these conditions can be avoided with proper preparation. Finally, Safecoat products are formulated to work together. Optimum results are best obtained by using a Safecoat primer, for example, before applying Safecoat paint. Of course, always read the application instructions before beginning the job.

APPLICATION: Always have adequate ventilation. The surface should be completely dry before application. Before using, stir well, then apply as is, using a high quality nylon or synthetic bristle brush or roller of appropriate nap (1/4”-3/8” nap recommended). Do not
apply in thick films or load paint onto the surface; thin coats are better than one thick coat. For spraying, reduce with up to 1/2 pint of water per gallon. Use an airless sprayer, minimum 2000 p.s.i., with a .015-.017 tip. Use a 60 mesh filter. When spraying, do not substitute backrolling for a second coat. Always use a painter’s mask when spraying.

COVERAGE: One gallon of Safecoat Cabinet & Trim Enamel covers approximately 350 square feet in one coat depending on surface porosity.

CLEAN-UP: Clean tools and equipment while they are still wet with a solution of SafeChoice Super Clean and warm water.

DRYING/CURING TIME: Under normal conditions, Safecoat Cabinet & Trim Enamel dries to touch in one hour. Wait at least four hours before applying each additional coat - longer if rainy or high humidity conditions prevail. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55°F. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.

COLORS: Safecoat Cabinet & Trim Enamel is available in bases which may be tinted to virtually any shade with a water-based tinting system available at most paint stores.

LIMITATIONS: Unlike conventional paints, Safecoat is made without formaldehyde preservatives. Store in airtight containers. Do not contaminate. Do not use when indoor or surface temperature is below 55°F.

HEALTH PRECAUTIONS: As with all coatings and stains, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation. If you are chemically sensitive, always test for personal tolerance.

LIMITED LIABILITY: The great variation between environmental factors, possible surfaces and application techniques, and the lack of control we have over such matters, must affect our policies. Safecoat products are guaranteed not to be defective when applied and used in accordance with instructions. However, liability, whether express or implied, is limited to replacement of product or refund of purchase price and cannot include liability for labor costs or consequential damages. Because of the variety of circumstances affecting each job, it is the user’s responsibility to determine the suitability and safety of the product for any particular application. This limited warranty may not be modified or extended by manufacturer’s representatives, distributors, or dealers of AFM products. We particularly recommend that users always test in small inconspicuous areas before application to the entire surface.

Click here for MSDS

Price: $50.30

AFM Zero VOC Eggshell Paint

Sun, 15 Jan 2006 23:26:11 +0100

DESCRIPTION: Safecoat Eggshell Zero VOC is a premium quality, fast curing enamel designed for interior surfaces where an eggshell finish and superior film formation properties are needed. It is particularly well suited for areas in which the health of the occupants is a concern: schools, hospitals, homes, offices - anywhere people want to reduce their exposure to toxic chemicals. Safecoat paints have almost no odor during application and are odor free once cured. They contain no formaldehyde, ammonia, crystalline silica, or ethylene glycol.

USE ON: Walls, ceilings, wallboard, properly cured and primed plaster, masonry and primed metal.

ADVANTAGES / SIGNIFICANT BENEFITS:

Superior, durable finish. Fully tintable to all pastel colors (some colorant systems may add a small amount of VOC).

Safely used by and for the chemically sensitive.

Low odor, non-offensive to installer and occupant.

Fights indoor air pollution, limits outgassing from the substrate.

Zero VOC content, meets or exceeds all federal and state air quality regulations, including California.

SURFACE PREPARATION: Careful surface preparation is the most important part of painting. Surfaces to be coated with Safecoat Eggshell Zero VOC should be sound and cleaned of dirt, grease and oil. Cleaning with an odorless, dye-free, all-purpose cleaner like SafeChoice Super Clean is recommended. Previously painted surfaces in poor condition should be scraped, sanded smooth, and primed with a coat of Safecoat Transitional Primer. Always test for adhesion over prior coatings (water based paints do not adhere well to oil based finishes without removal or careful surface preparation, for example). New wallboard or sheetrock should first be coated with Safecoat New Wallboard Primecoat HPV. Porous new wood should be sealed and sanded before priming, preferably with a safe product such as Safecoat Transitional Primer. Water and other stains must be blocked so they do not bleed through. The best finish will be achieved with a primer and two finish coats. Environmental conditions are crucial: if the air temperature is too hot or too cold, the product will not cure properly; if the air or the wood is too dry, or there is too much moisture in or on the surface, other problems may result. In addition, many surfaces contain water-soluble tannins or acids which are activated by the application of a water based product and will “bleed through” to the surface. All of these conditions can be avoided with proper preparation. Finally, Safecoat products are formulated to work together. Optimum results are best obtained by using a Safecoat primer, for example, before applying Safecoat paint. Of course, always read the application instructions before beginning the job.

APPLICATION: Always have adequate ventilation. The surface should be completely dry before application. Before using, stir well, then apply as is, using a high quality nylon or synthetic bristle brush or roller of appropriate nap (1/4”-3/8” nap recommended). Do not apply in thick films or load paint onto the surface; thin coats are better than one thick coat. For spraying, reduce with up to 1/2 pint of water per gallon. Use an airless sprayer, minimum 2000 p.s.i., with a .015-.017 tip. Use a 60 mesh filter. When spraying, do not substitute backrolling for a second coat. Always use a painter’s mask when spraying.

COVERAGE: One gallon of Safecoat Eggshell Zero VOC covers approximately 350 square feet in one coat depending on surface porosity. Untreated drywall will require several coats.

CLEAN-UP: Clean tools and equipment while they are still wet with a solution of SafeChoice Super Clean and warm water.

DRYING/CURING TIME: Under normal conditions, Safecoat Eggshell Zero VOC dries to touch in one hour. Wait at least four hours before applying each additional coat - longer if rainy or high humidity conditions prevail. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55°F. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.

COLORS: Safecoat Eggshell Zero VOC is available in a pastel base which may be tinted to any pastel shade with a water-based tinting system available at most paint stores.

LIMITATIONS: Unlike conventional paints, Safecoat is made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use when indoor or surface temperature is below 55°F.

HEALTH PRECAUTIONS: As with all coatings and stains, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation. If you are chemically sensitive, always test for personal tolerance.

LIMITED LIABILITY: The great variation between environmental factors, possible surfaces and application techniques, and the lack of control we have over such matters, must affect our policies. Safecoat products are guaranteed not to be defective when applied and used in accordance with instructions. However, liability, whether express or implied, is limited to replacement of product or refund of purchase price and cannot include liability for labor costs or consequential damages. Because of the variety of circumstances affecting each job, it is the user’s responsibility to determine the suitability and safety of the product for any particular application. This limited warranty may not be modified or extended by manufacturer’s representatives, distributors, or dealers of AFM products. We particularly recommend that users always test in small inconspicuous areas before application to the entire surface.

Click here for MSDS

Price: $45.95

AFM Zero VOC Flat Paint

Sun, 08 Jan 2006 19:13:18 +0100

DESCRIPTION: Safecoat Flat Zero VOC is a premium quality, fast curing paint designed for interior surfaces where a flat finish and superior film formation properties are needed. It is particularly well suited for areas in which the health of the occupants is a
concern: schools, hospitals, homes, offices - anywhere people want to reduce their exposure to toxic chemicals. Safecoat paints have almost no odor during application and are odor free once cured. They contain no formaldehyde, ammonia, crystalline silica,
or ethylene glycol.

USE ON: Walls, ceilings, wallboard, properly cured and primed plaster, masonry and primed metal.

SURFACE PREPARATION: Careful surface preparation is the most important part of painting. Surfaces to be coated with Safecoat Flat Zero VOC should be sound and cleaned of dirt, grease and oil. Cleaning with an odorless, dye-free, all-purpose
cleaner like SafeChoice Super Clean is recommended. Previously painted surfaces in poor condition should be scraped, sanded smooth, and primed with a coat of Safecoat Transitional Primer. Always test for adhesion over prior coatings (water based paints do not adhere well to oil based finishes without removal or careful surface preparation, for example). New wallboard or sheetrock should first be coated with Safecoat New Wallboard Primecoat HPV. Porous new wood should be sealed and sanded before priming, preferably with a safe product such as Safecoat Transitional Primer. Water and other stains must be blocked so they do not bleed through. The best finish will be achieved with a primer and two finish coats. Environmental conditions are crucial: if the air temperature is too hot or too cold, the product will not cure properly; if the air or the wood is too dry, or there is too much moisture in or on the surface, other problems may result. In addition, many surfaces contain water-soluble tannins or acids which are activated by the application of a water based product and will “bleed through” to the surface. All of these conditions can be avoided with proper preparation. Finally, Safecoat products are formulated to work together. Optimum results are best
obtained by using a Safecoat primer, for example, before applying Safecoat paint. Of course, always read the application instructions before beginning the job.

APPLICATION: Always have adequate ventilation. The surface should be completely dry before application. Before using, stir well, then apply as is, using a high quality nylon or synthetic bristle brush or roller of appropriate nap (1/4”-3/8” nap recommended).
Do not apply in thick films or load paint onto the surface; thin coats are better than one thick coat. For spraying, reduce with up to 1/2 pint of water per gallon. Use an airless sprayer, minimum 2000 p.s.i., with a .015-.017 tip. Use a 60 mesh filter. When spraying, do not substitute backrolling for a second coat. Always use a painter’s mask when spraying.

COVERAGE: One gallon of Safecoat Flat Zero VOC covers approximately 350 square feet in one coat depending on surface porosity. Untreated drywall will require several coats.

CLEAN-UP: Clean tools and equipment while they are still wet with a solution of SafeChoice Super Clean and warm water.

DRYING/CURING TIME: Under normal conditions, Safecoat Flat Zero VOC dries to touch in one hour. Wait at least four hours before applying each additional coat - longer if rainy or high humidity conditions prevail. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55°F. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.

COLORS: Safecoat Flat Zero VOC is available in a pastel base which may be tinted to any pastel shade with a water-based tinting system available at most paint stores.

LIMITATIONS: Unlike conventional paints, Safecoat is made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use when indoor or surface temperature is below 55°F.

HEALTH PRECAUTIONS: As with all coatings and stains, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation. If you are chemically sensitive, always test for personal tolerance.

LIMITED LIABILITY: The great variation between environmental factors, possible surfaces and application techniques, and the lack of control we have over such matters, must affect our policies. Safecoat products are guaranteed not to be defective when
applied and used in accordance with instructions. However, liability, whether express or implied, is limited to replacement of product or refund of purchase price and cannot include liability for labor costs or consequential damages. Because of the variety of
circumstances affecting each job, it is the user’s responsibility to determine the suitability and safety of the product for any particular application. This limited warranty may not be modified or extended by manufacturer’s representatives, distributors, or dealers of AFM products. We particularly recommend that users always test in small inconspicuous areas before application to the entire surface.

Click here for MSDS

Price: $43.95

AFM Zero VOC Semi-Gloss Paint

Sun, 15 Jan 2006 23:26:11 +0100

DESCRIPTION: Safecoat SemiGloss Zero VOC is a premium quality, fast curing enamel designed for interior surfaces where a semi-gloss finish and superior film formation properties are needed. It is particularly well suited for areas in which the health of the occupants is a concern: schools, hospitals, homes, offices - anywhere people want to reduce their exposure to toxic chemicals. Safecoat paints have almost no odor during application and are odor free once cured. They contain no formaldehyde, ammonia, crystalline silica, or ethylene glycol.

USE ON: Walls, ceilings, wallboard, properly cured and primed plaster, masonry and primed metal.

ADVANTAGES / SIGNIFICANT BENEFITS:

Superior, durable finish. Fully tintable to all pastel colors (some colorant systems may add a small amount of VOC).

Safely used by and for the chemically sensitive.

Low odor, non-offensive to installer and occupant.

Fights indoor air pollution, limits outgassing from the substrate.

Zero VOC content, meets or exceeds all federal and state air quality regulations, including California.

SURFACE PREPARATION: Careful surface preparation is the most important part of painting. Surfaces to be coated with Safecoat SemiGloss Zero VOC should be sound and cleaned of dirt, grease and oil. Cleaning with an odorless, dye-free, all-purpose cleaner like SafeChoice Super Clean is recommended. Previously painted surfaces in poor condition should be scraped, sanded smooth, and primed with a coat of Safecoat Primer Undercoater. Always test for adhesion over prior coatings (water based paints do not adhere well to oil based finishes without removal or careful surface preparation, for example). New wallboard or sheetrock should first be coated with Safecoat New Wallboard Primecoat HPV. Porous new wood should be sealed and sanded before priming, preferably with a safe product such as Safecoat Transitional Primer. Water and other stains must be blocked so they do not bleed through. The best finish will be achieved with a primer and two finish coats. Environmental conditions are crucial: if the air temperature is too hot or too cold, the product will not cure properly; if the air or the wood is too dry, or there is too much moisture in or on the surface, other problems may result. In addition, many surfaces contain water-soluble tannins or acids which are activated by the application of a water based product and will “bleed through” to the surface. All of these conditions can be avoided with proper preparation. Finally, Safecoat products are formulated to work together. Optimum results are best obtained by using a Safecoat primer, for example, before applying Safecoat paint. Of course, always read the application instructions before beginning the job.

APPLICATION: Always have adequate ventilation. The surface should be completely dry before application. Before using, stir well, then apply as is, using a high quality nylon or synthetic bristle brush or roller of appropriate nap (1/4”-3/8” nap recommended). Do not apply in thick films or load paint onto the surface; thin coats are better than one thick coat. For spraying, reduce with up to 1/2 pint of water per gallon. Use an airless sprayer, minimum 2000 p.s.i., with a .015-.017 tip. Use a 60 mesh filter. When spraying, do not substitute backrolling for a second coat. Always use a painter’s mask when spraying.

COVERAGE: One gallon of Safecoat SemiGloss Zero VOC covers approximately 350 square feet in one coat depending on surface porosity. Untreated drywall will require several coats.

CLEAN-UP: Clean tools and equipment while they are still wet with a solution of SafeChoice Super Clean and warm water.

DRYING/CURING TIME: Under normal conditions, Safecoat SemiGloss Zero VOC dries to touch in one hour. Wait at least four hours before applying each additional coat - longer if rainy or high humidity conditions prevail. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55°F. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.

COLORS: Safecoat SemiGloss Zero VOC is available in a pastel base which may be tinted to any pastel shade with a water-based tinting system available at most paint stores.

LIMITATIONS: Unlike conventional paints, Safecoat is made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use when indoor or surface temperature is below 55°F.

HEALTH PRECAUTIONS: As with all coatings and stains, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation. If you are chemically sensitive, always test for personal tolerance.

LIMITED LIABILITY: The great variation between environmental factors, possible surfaces and application techniques, and the lack of control we have over such matters, must affect our policies. Safecoat products are guaranteed not to be defective when applied and used in accordance with instructions. However, liability, whether express or implied, is limited to replacement of product or refund of purchase price and cannot include liability for labor costs or consequential damages. Because of the variety of circumstances affecting each job, it is the user’s responsibility to determine the suitability and safety of the product for any particular application. This limited warranty may not be modified or extended by manufacturer’s representatives, distributors, or dealers of AFM products. We particularly recommend that users always test in small inconspicuous areas before application to the entire surface.

Click here for MSDS

Price: $47.95

AFM Wallboard Primecoat HPV

Sun, 08 Jan 2006 19:13:18 +0100

DESCRIPTION: Safecoat New Wallboard Primecoat HPV is a premium quality, fast curing, flat finish primer specially formulated to provide a superior prime coat over interior surfaces such as new gypsum wallboard and textured sheetrock. It equalizes the absorption rate of topcoat paints over a variety of surfaces with different porosities,
and helps to eliminate decorating problems over textured sheetrock and tape joints on wallboard.

USE ON: New wallboard and textured sheetrock. May also be used on specialty porous and absorptive materials like Gridcore®, certain ceiling tiles, etc.

ADVANTAGES / SIGNIFICANT BENEFITS:

Solves finishing problems such as “telegraphing” or “joint banding” by equalizing porosity and texture, filling voids left by today’s building materials, so that top coats cover more evenly.

Applies economically and easily, dries fast for quick recoat under most circumstances.

Low odor, non-offensive to installer and occupant.

Minimal outgassing, fights indoor air pollution by sealing in the outgassing from the substrate.

Very low VOC content, meets or exceeds all federal and state air quality regulations, including California.

Contains no formaldehyde.

SURFACE PREPARATION: Surfaces to be coated with Safecoat New Wallboard Primecoat HPV should be sound and cleaned of dirt, grease, mildew and oil. Do not apply over existing wallpaper. Tape joints must be tight and sound. Spray texture must be uniform and adhering properly.

THINNING: May be thinned with up to 1 gallon water per 5 gallons Primecoat HPV for easier application. For heavier textured walls, do not overthin. Overthinning will reduce the effectiveness of the product at filling surface voids.

APPLICATION: May be applied with a brush, roller or airless sprayer. Use a high quality nylon brush. A quality roller cover with a nap height of 1/4” to 1/2” is recommended. (Note: high pile heights will add additional texture.) Airless spayers should have a 17/1000 to 21/1000 tip (reversible type is best). Only a 30 mesh high pressure
filter should be used. Use a painter’s mask when spraying. For full coverage application, overlap preceding application with 1/4 to 1/2 the fan width at a distance of 18” from
surface. Do not apply on cold, damp days or if surface, container or air temperature is below 55 degrees.

COVERAGE: One gallon of Safecoat New Wallboard Primecoat HPV covers approximately 300-400 square feet in one coat depending on method of application and surface texture and porosity.

CLEAN-UP: Clean tools and equipment while they are still wet with a solution of SafeChoice Super Clean and warm water.

DRYING/CURING TIME: Under normal conditions, Safecoat New Wallboard Primecoat HPV dries to touch in one hour and is re-coatable after 2-4 hours. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.

LIMITATIONS: Unlike conventional paints, Safecoat paints are made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use when indoor temperature is below 55 degrees F. Do not freeze.

HEALTH PRECAUTIONS: As with all coatings and stains, keep container tightly closed and out of the reach of children. Do not take internally. Always use adequate
ventilation. If you are chemically sensitive, always test for personal tolerance.

LIMITED LIABILITY: The great variation between environmental factors, possible surfaces and application techniques, and the lack of control we have over such
matters, must affect our policies. Safecoat products are guaranteed not to be defective when applied and used in accordance with instructions. However, liability, whether
express or implied, is limited to replacement of product or refund of purchase price and cannot include liability for labor costs or consequential damages. Because of the
variety of circumstances affecting each job, it is the user’s responsibility to determine the suitability and safety of the product for any particular application. This limited warranty may not be modified or extended by manufacturer’s representatives, distributors, or dealers of AFM products. We particularly recommend that users always test in small inconspicuous areas before application to the entire surface.

Click here for MSDS

Price: $36.65

AFM Transitional Primer

Sun, 08 Jan 2006 19:13:18 +0100

DESCRIPTION: Safecoat Transitional Primer is a premium quality, waterbased, flat finish universal primer specifically formulated to solve difficult application problems without the use of toxic and malodorous chemicals. It is particularly well suited for transitioning from existing oil based painted surfaces to waterbased coatings. Because it has an extremely tight and efficient polymer network, it is when properly applied useful as a stain blocker for many of the knot holes, water soluble stains and oils, tannins and terpenes in wood which can “bleed through” to the surface upon the application of traditional waterbased primers. Like all Safecoat paints, it is the least toxic product of its type, and contains no naphtha or other aromatic solvents, and no formaldehyde, ethylene glycol, ammonia, acetone, heavy metals, crystalline silica or other carcinogenic or hazardous materials. Safecoat Transitional Primer is naturally low in odor, and unlike other paints contains no masking agents or fragrances to hide the smells of toxic chemicals.

USE ON: Most interior and exterior surfaces: walls, ceilings, wood and wood trim, fully cured plaster, stucco, masonry and drywall.

ADVANTAGES / SIGNIFICANT BENEFITS:

Unique molecular structure promotes strong penetration and mechanical adhesion.

Environmentally friendly - very low VOC, the lowest toxicity for a product of its type.

Tight polymer network makes an excellent sealer.

Transitions” oil based surfaces to accept waterbased coatings.

Good stain blocker, reduces bleed through.

Durable, high performance undercoating.

Low odor.

Contains no formaldehyde or aromatic hydrocarbons.

Fights indoor air pollution.

SURFACE PREPARATION: Careful surface preparation is important. Surfaces to be coated with Safecoat Transitional Primer should be sanded and cleaned of dirt, grease, mildew and oil. Cleaning with an odorless, dye free, all purpose cleaner like SafeChoice Super Clean is recommended. Previously painted surfaces in poor condition should be scraped and sanded smooth before priming. Always spot test for adhesion over prior coatings. Surface should be completely dry before application.

APPLICATION: Surfaces painted with oil based coatings should be sanded to promote adhesion (all gloss must be removed). Wet sanding is recommended. USE CAUTION WHEN SANDING: some old paints contain lead and must not be handled in such a way as to introduce lead into the environment or expose workers to lead (primarily dust) through means of sanding or abrasion. Knot holes and water stains should be spot primed before undercoating the entire surface. Always have adequate ventilation. Before using, stir Safecoat Transitional Primer well, then apply as is. For spraying, reduce with up to 1/2 pint of water per gallon. Use a painter’s mask when spraying. May be applied with a brush, roller or airless sprayer. Use a high quality nylon brush. A quality roller cover with a nap height of 1/4” to 1/2” is recommended. (Note: high pile heights will add additional texture.) Airless sprayers should have a 17/1000 to 21/1000 tip (reversible type is best). Only a 30 mesh high pressure filter should be used. Use a painter’s mask when spraying. For full coverage application, overlap preceding application with 1/4 to 1/2 the fan width at a distance of 18” from surface. Do not apply on cold, damp days or if surface, container or air temperature is below 55 degrees.

COVERAGE: One gallon of Safecoat Transitional Primer covers approximately 300-350 square feet in one coat depending on method of application and surface texture and porosity. One full coat is generally sufficient for most jobs, such as for transitioning from oil based surfaces to waterbased coatings. Some stains may require two coats for complete blocking; the primer may absorb the stain into itself on the first coat, where it will be “locked up” and blocked by the second.

CLEAN-UP: Clean tools and equipment while they are still wet with a solution of SafeChoice Super Clean and warm water.

DRYING/RECOATING TIME: Under normal conditions, Safecoat Transitional Primer dries to touch within one hour. For best results wait at least 8 hours before recoating or finish coating when transitioning from oil to water. For stain blocking, allow primer to cure overnight before recoating. This product will continue to develop increased adhesion over a full 7 day cure cycle. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.

LIMITATIONS: Unlike conventional paints, Safecoat paints are made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use when ambient or surface temperature is below 50 degrees F. Do not freeze.

HEALTH PRECAUTIONS: As with all coatings and stains, keep container tightly closed and out of the reach of children. Do not take internally. Always use adequate ventilation. Wear a mask when sanding and avoid breathing sanding dust. If you are chemically sensitive, always test for personal tolerance.

LIMITED LIABILITY: The great variation between environmental factors, possible surfaces and application techniques, and the lack of control we have over such matters, must affect our policies. Safecoat products are guaranteed not to be defective when applied and used in accordance with instructions. However, liability, whether express or implied, is limited to replacement of product or refund of purchase price and cannot include liability for labor costs or consequential damages. Because of the variety of circumstances affecting each job, it is the user’s responsibility to determine the suitability and safety of the product for any particular application. This limited warranty may not be modified or extended by manufacturer’s representatives, distributors, or dealers of AFM products. We particularly recommend that users always test in small inconspicuous areas before application to the entire surface.

Click here for MSDS
Price: $48.20

AFM MetalCoat Primer

Sun, 08 Jan 2006 19:13:18 +0100

DESCRIPTION: AFM MetalCoat Acrylic Metal Primer is a thermoplastic acrylic emulsion primer fortified with rust inhibiting pigments. Designed for use on non-ferrous metal, iron, steel, aluminum, galvanized and masonry. It is not recommended for copper. Provides a tough, flexible film, producing outstanding corrosion resistance and excellent adhesion. May be used on interior or exterior, including marine atmospheres. Very low odor and low VOC, it is one of the least toxic metal primers available, formulated without the heavy metals and other hazardous ingredients commonly used.

USE ON: Interior and exterior metal surfaces such as steel, galvanized iron and aluminum. May be left as a finish in a three primer coat application. May be recoated with a variety of other finishes, and is an excellent foundation for Safecoat paints, today’s premium not toxic coating.

SURFACE PREPARATION: All surfaces must be clean, dry, free from grease, dirt, rust, mill scale and any other foreign matter. Surfaces must be very clean for this product to be effective. New galvanized should be cleaned with an acetic acid or phosphoric acid wash and rinsed. Rust and mill scale must be removed with power steel brushing or sandblasting. All other foreign matter must be cleaned with a solvent wash and dried thoroughly before painting. Dull glossy surfaces and remove dust.

APPLICATION: May be applied with a roller, nylon brush or airless sprayer. Spray coats are recommended above all other application methods. Use an airless sprayer with a .015 - .017 tip. Apply full coats for maximum corrosion resistance. A minimum of 1.5 mil thickness (dry film thickness) is needed for protection. This product may be tinted if required, with all purpose tinting colorants, but do not exceed two fluid ounces per gallon. Do not apply when air or surface temperature is below 55 degrees F or on damp, foggy days.

COVERAGE: One gallon of MetalCoat Acrylic Metal Primer covers approximately 300 square feet in one coat depending on method of application and surface texture.

THINNING: None required. If thinning becomes necessary, use water sparingly.

CLEAN-UP: Clean tools and equipment while they are still wet with a solution of SafeChoice Super Clean and warm water.

DRYING/CURING TIME: Under normal conditions, MetalCoat Acrylic Metal Primer dries to touch in 30 minutes and is re-coatable after four hours. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F. Thick application, high humidity or conditions other than normal will cause the product to dry and cure more slowly.

LIMITATIONS: Unlike conventional primers, MetalCoat Acrylic Metal Primer is made without formaldehyde preservatives. Do not contaminate. Do not use when ambient or surface temperature is below 55 degrees F. Do not freeze.

HEALTH PRECAUTIONS: As with all coatings, keep container tightly closed and out of the reach of children. Do not take internally. Always use adequate ventilation. If you are chemically sensitive, always test for personal tolerance.

LIMITED LIABILITY: The great variation between environmental factors, possible surfaces and application techniques, and the lack of control we have over such matters, must affect our policies. AFM products are guaranteed not to be defective when applied and used in accordance with instructions. However, liability, whether express or implied, is limited to replacement of product or refund of purchase price and cannot include liability for labor costs or consequential damages. Because of the variety of circumstances affecting each job, it is the user’s responsibility to determine the suitability and safety of the product for any particular application. This limited warranty may not be modified or extended by manufacturer’s representatives, distributors, or dealers of AFM products. We particularly recommend that users always test in small inconspicuous areas before application to the entire surface.

Click here for MSDS

Price: $51.35

Colortrend Plus Zero VOC Pigments

Sun, 08 Jan 2006 19:13:18 +0100

These are the Zero VOC pigments that we will use to tint your paint. If you own a paint tint dispenser and you are looking for Zero VOC tints, then these products are for you.
Price: $28.48

AFM Paint Fan Deck

Sun, 08 Jan 2006 21:35:14 +0100

Use this fan deck to choose your colors! Natural Built Home has the ability to tint paint to any of these colors.

Click to see the AFM Ambiance Color Palette.

Please note that due to variance in monitor calibrations, the on-screen color representations here are not necessarily precise reproductions of actual paint colors.

Price: $30.05

AFM Low VOC Cabinet & Trim Enamel (Eggshell)

Sun, 08 Jan 2006 19:13:18 +0100

Extremely durable, semi-gloss finish.

Resistant to blocking.

Safely used by and for the chemically sensitive.

Low odor, non-offensive to installer and occupant.

Fights indoor air pollution, seals in the outgassing from the substrate.

Very low VOC content, meets or exceeds all federal and state air quality regulations, including California.

AFM Low VOC All Purpose Exterior Satin Paint

Sun, 08 Jan 2006 19:13:18 +0100

DESCRIPTION: Safecoat All Purpose Exterior Satin is a sophisticated, premium quality, fast curing paint designed for a variety of exterior surfaces where a durable, weather resistant finish and superior film formation properties are needed. It is well suited for
buildings in which the health of occupants is a concern: schools, hospitals, homes, offices - anywhere people want to reduce their exposure to toxic chemicals. It is blister and fade resistant, has excellent hide, extremely low voc for sustainability and pollution
reduction, and cleans up easily with soap and water. Safecoat paints have almost no odor during application and are odor free once cured. They contain no formaldehyde, ammonia, crystalline silica, ethylene glycol or other highly toxic ingredients.

USE ON: Exterior walls and trim made of wood, stucco, masonry, primed metal and other typical surfaces.

SURFACE PREPARATION: Careful surface preparation is the most important part of painting. Surfaces to be coated should be dry, sound and cleaned of dirt, grease, oil, loose, peeling or chalking paint and other contaminants. Cleaning with an odorless, dyefree, all-purpose cleaner like SafeChoice Super Clean is recommended. Previously painted surfaces in poor condition should be scraped, sanded smooth, and primed with a coat of Safecoat Transitional Primer. Always test for adhesion over prior coatings
(water based paints do not adhere well to oil based finishes without removal or careful surface preparation, for example). Unpainted wood should be sanded and primed, and water and other stains must be blocked so they do not bleed through. The best finish will be achieved with a primer and two finish coats. Environmental conditions are crucial: if the air temperature is too hot, the product will not cure properly; if the air or the wood is too dry, or there is too much moisture in or on the surface, other problems
may result. In addition, many surfaces contain water-soluble tannins or acids that are activated by the application of a water based product and will “bleed through” to the surface. All of these conditions can be avoided with proper preparation and priming.
Finally, Safecoat products are formulated to work together. Optimum results are best obtained by using a Safecoat primer, for example, before applying Safecoat paint. Of course, always read the application instructions before beginning the job.

APPLICATION: The surface should be completely dry before application. Stir well, then apply as is, using a high quality nylon or synthetic bristle brush or roller of appropriate nap (1/4”-3/8” nap recommended). Do not apply in thick films or load paint onto the surface; thin coats are better than one thick coat. For spraying, reduce with up to 1/2 pint of water per gallon. Use an airless sprayer, minimum 2000 p.s.i., with a .015-.017 tip. Use a 60-mesh filter. Always use a painter’s mask when spraying.

COVERAGE: One gallon covers approximately 350 square feet in one coat depending on surface porosity and color.

CLEAN UP: Clean tools and equipment while still wet with a solution of SafeChoice Super Clean and warm water.

DRYING/CURING TIME: Safecoat dries to touch in one hour, under normal conditions. Wait at least six hours before applying each additional coat - longer if high humidity conditions prevail. Normal conditions include a dry surface, access to fresh air flow, and moderate humidity.

COLORS: Safecoat is available in bases that may be tinted to virtually any color with water based tinting systems.

NO MILDEWCIDE/FUNGICIDE FORMULA: Because of the potential toxicity of such ingredients, Safecoat All Purpose Exterior Satin does not contain additives providing mildewcide or fungicide properties. Accordingly, the decision to add long-term mildew resistance, with an additive easily obtained from your Safecoat dealer or at virtually any local hardware store, has been left to the individual user. Where mold or mildew inhibitors are required or desired, such an additive should be thoroughly mixed into the coating before application. Of course, never apply any paint over a surface already contaminated with mold, mildew or related substances.

LIMITATIONS: Unlike conventional paints, Safecoat is made without formaldehyde preservatives. Do not contaminate. Do not use while raining or when surface temperature is below 55°F. Keep from freezing.

HEALTH PRECAUTIONS: Keep container tightly closed and out of the reach of children. Do not take internally. Always use adequate ventilation. If you are chemically sensitive, always test for personal tolerance.

NOTICE: Removal of old paint by sanding, scraping or other means may generate dust or fumes which contain lead. Exposure to lead dust or fumes may cause adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For additional information, contact the USEPA/Lead Information Hotline at 1-800-LEAD-FYI.

LIMITED LIABILITY: The great variation between environmental factors, possible surfaces and application techniques, and the lack of control we have over such matters, must affect our policies. Safecoat products are guaranteed not to be defective when applied and used in accordance with instructions. However, liability, whether express or implied, is limited to replacement of product or refund of purchase price and cannot include liability for labor costs or consequential damages. Because of the variety of circumstances affecting each job, it is the user’s responsibility to determine the suitability and safety of the product for any particular application. This limited warranty may not be modified or extended by manufacturer’s representatives, distributors, or dealers of AFM products. We particularly recommend that users always test in small inconspicuous areas before application to the entire surface.

Click here for MSDS

Price: $47.15