spacer
header
 Safe for You. Sustainable for Your Planet.
header

Join the Conversation

Facebook

Products

Flooring Counter Tops Cabinetry Building Materials Tile Sinks Water Saving Fixtures Energy Saving Materials Cleaning Supplies Paint & Finishes    AFM Paints & Primers    Yolo Paints & Primers    Soy Paint    American Clay    Stains & Clear Finishes    Natural Finishes and Paints    Concrete Stains    Paint Stripper    3D Wall Tiles    Painting Supplies Lighting Garden & Landscaping Gift Ideas Green on a Budget Classes Outdoor Furniture

List All Products

Advanced Search
Show Cart
Your Cart is currently empty.

Proud to Sponsor


  
Enter your email here to stay up to date on our green building products, classes and sales!
E-mail
Paint & Finishes arrow Natural Finishes and Paints arrow BioShield Hard Oil

BioShield Hard Oil

Starting at $20.20

Ask a question about this product
:
This low-VOC, low-odor hard oil creates a deeply penetrating finish that is hard to beat for most wood surfaces. We especially recommend it for high-moisture and high-traffic areas such as baths and kitchens. As one of our most durable oils, it is suitable for hardwood and softwood floors.

Specifications: This product becomes a clear to slightly amber breathable and elastic coating with superior water-resistent characteristics. It will enhance the grain of any wood and is an economical product because of its coverage characteristics.

Application: Hard Oil #9 can be applied by brush or spray to dry, absorbent surfaces free from contaminants such as oil, grease, wax, and nicotine. The moisture content for hardwoods should be 12 percent or less and for softwoods it should be 18 percent or less. Very resinous woods such as teak should be cleaned with a thinner.

The oil should be applied in a thin, even coat, and we recommend two to three coats. After the oil has been applied, any excess must be wiped from the surface after approximately 15 to 20 minutes with a soft, lint-free absorbent cotton cloth. After allowing the final coat to dry for at least 24 hours, we recommend a finishing coat.

Coverage: Hard Oil will cover 150 to 300 square feet per liter depending upon surface absorbency.

Ingredients: Linseed Oil, Tung Oil, Colophonium Resin, Castor Stand Oil, Isoaliphatics, Lead-free dryers (Zircon, Cobalt Octoat), and Oximes (Anti-skinning Agent).



Back
spacer

MINNESOTA'S PREMIER RESOURCE FOR GREEN BUILDING SUPPLIES
 Phone: 612.605.7999 Toll-Free: 866.670.2742 E-mail:answers@naturalbuilthome.com
Copyright 2005-2010 Natural Built Home Inc. All rights reserved.
spacer