|
Acri-Soytm
Penetrating Clear Satin Sealer
A bio-based penetrating clear satin sealer that is formulated from advanced chemical technology utilizing soybean oils and modified acrylics. Soy ester chemistry has a superior ability to effectively penetrate and protect porous substrate surfaces by creating a molecular bond and seal for a breathable, yet highly repelling surface protection.
This advanced formulation outperforms typical water-based sealers and provides long lasting protection against moisture, efflorescence, dusting, marring, and stains. The higher spread rate and effective penetration is due to the patented soy ester formulation that won't evaporate before getting into the pores of the substrate.
Recommend For:
Green Building, air quality and environmentally compliant interior or exterior applications. Use where a safe premium quality sealer is desired. It is a required lock-in protective sealer for all ecoprocotetm concrete and wood stain products. Effectively used for porous surfaces such as:
|
Concrete
|
Wood
|
|
Masonry
|
Fiber Board
|
|
Brick Walls
|
Polyfoam
|
|
Brick Pavers
|
Natural Stone
|
| Stucco |
Unpolished Tile |
|
Drywall
|
Decorative Art
|
|
Rammed Earth
|
And More...
|
Packaging:
1 gallon cans or 5 gallon pails
|
|
 |
|
|
|
|
|
|
|
Features:
- Bio-Based Soy Technology
- Non-Toxic, Non Flammable
- Very Low VOC
- Virtually Odorless
- Penetrating Sealer
- Protective Sealer
- Does Not Alter Surface Friction
- Clear Satin Finish
- Water Resistant
- Stain Resistant
- Mar Resistant
- Safe, Easy, High Spread Application
|
|
Application Data:
Make sure all surfaces and stains have properly cured per manufacturer instructions. All surfaces must be dry and free of grease, oils, wax, dirt, contaminants, etc., prior to sealer application. Apply material to a dry surface using a brush, pad, 3/8” nap roller or low pressure spray in a thin even coat. Back-roll or wipe where necessary to avoid puddles. One coat application is generally sufficient depending on surface porosity and temperature. If additional coats are required, allow a 1 to 2 hour inter-coat dry time, then apply coat as desired.
Reseal your surface every 2 to 3 years or as needed to prolong the life and beauty of your substrate finish.
Technical Data:
Read all instructions carefully and refer to product Material Safety Data Sheet.
Color: Milky White (dries clear)
VOC: <25 g/l
Odor: Low, Soy Ester
Shelf Life: 1 year
Coverage: 400-600 sq.ft./gal approximate
Temperature: 40°F min to 120°F max
Relative Humidity: 85% max, below 80% for best results.
Dry to Touch: 1 hour approximate
To Top Coat, if desired: 1 to 2 hours
To Full Cure: 5 to 7 days
|
